My thoughts about the Nutritower
In this video ill give you my thoughts about the Nutritower.
E Mountainboard riding in Austria. Take 2.
Thats the second ride with my Trampa E Mountainboard.
It was a rainy Day on steep Tracks, but the Board took it great.
Let me know if you want to see more of this…
Best wishes
Hansom
E Mountainboard riding in Austria. First Ride
Thats the first ride with my Trampa E Mountainboard.
It was a rainy Day on steep Tracks, but the Board took it great.
Let me know if you want to see more of this…
Best wishes
Hansom
CR 10SPro AntiBacklash
Dyson Battery
Logo introduction
Building a BiasT for QO-100 (ESHail2)
In this video im building a Bias-T for the use with QO-100 after the guide from SotaBeams.
Link to the Article: https://www.sotabeams.co.uk/blog/biast-for-lnb-a-few-notes/
Thanks for Watching.
Twitter: @MeltdownCore
Website: www.oe8hsr.at
ADALM Pluto TCXO Mod (QO100 ES-Hail2)
This is a Video about modifying the ADALM Pluto with a new, more accurate TCXO (Abracon 0.5ppm). Im also showing the GND-Mod to prevent random shutdowns of the Pluto with different Powerdevices.
Special Thanks to:
DL4TMA
DM4DS
DF2ET
Homepage: www.oe8hsr.at
Twitter: @MeltdownCore
Assembling the Dual Patchfeed (POTY) for QO100 (ES-Hail’2)
In this Video im showing you how I assemble the Dual Patchfeed aka. POTY.
This Feed can be used when you want to work on QO100.
As far as I know:
The Designers of this Feed were Mike Willis, Remco den Besten and Paul Marsh aka. UHF-Satcom. Please write me if this is wrong then ill change it.
Special Thanks to the Guys mentioned above. They helped me a lot in the early days of QO100. If I have forgotten to mention someone, Please let me know.
Some useful Links:
A Radome and LNB Cover for the POTY from DM4DS:
https://www.thingiverse.com/thing:3779729
https://www.thingiverse.com/thing:3736069
A Adapter from 22mm to 40mm from M1SJE:
https://www.thingiverse.com/thing:3725110
A 3D-Printed Dielectric Lens from Hybridpretender:
http://www.hybridpretender.nl/lens_final.STL
My Building Guides for the Patchfeed and the Plates itself:
http://www.oe8hsr.at/blog/wp-content/uploads/Manuals/BuildingThePlates.pdf
http://www.oe8hsr.at/blog/wp-content/uploads/Manuals/PatchFeedAssembly.pdf
The original Blogpost from UHF-Satcom’s Blog:
https://uhf-satcom.com/blog/patch_antenna
Thank you for watching this Video, If you have Feedback or Recommendations, let me know.
Website: www.oe8hsr.at
Twitter: @MeltdownCore