Building a BiasT for QO-100 (ESHail2)
In this video im building a Bias-T for the use with QO-100 after the guide from SotaBeams.
Link to the Article: https://www.sotabeams.co.uk/blog/biast-for-lnb-a-few-notes/
Thanks for Watching.
Twitter: @MeltdownCore
Website: www.oe8hsr.at
ADALM Pluto TCXO Mod (QO100 ES-Hail2)
This is a Video about modifying the ADALM Pluto with a new, more accurate TCXO (Abracon 0.5ppm). Im also showing the GND-Mod to prevent random shutdowns of the Pluto with different Powerdevices.
Special Thanks to:
DL4TMA
DM4DS
DF2ET
Homepage: www.oe8hsr.at
Twitter: @MeltdownCore
Assembling the Dual Patchfeed (POTY) for QO100 (ES-Hail’2)
In this Video im showing you how I assemble the Dual Patchfeed aka. POTY.
This Feed can be used when you want to work on QO100.
As far as I know:
The Designers of this Feed were Mike Willis, Remco den Besten and Paul Marsh aka. UHF-Satcom. Please write me if this is wrong then ill change it.
Special Thanks to the Guys mentioned above. They helped me a lot in the early days of QO100. If I have forgotten to mention someone, Please let me know.
Some useful Links:
A Radome and LNB Cover for the POTY from DM4DS:
https://www.thingiverse.com/thing:3779729
https://www.thingiverse.com/thing:3736069
A Adapter from 22mm to 40mm from M1SJE:
https://www.thingiverse.com/thing:3725110
A 3D-Printed Dielectric Lens from Hybridpretender:
http://www.hybridpretender.nl/lens_final.STL
My Building Guides for the Patchfeed and the Plates itself:
http://www.oe8hsr.at/blog/wp-content/uploads/Manuals/BuildingThePlates.pdf
http://www.oe8hsr.at/blog/wp-content/uploads/Manuals/PatchFeedAssembly.pdf
The original Blogpost from UHF-Satcom’s Blog:
https://uhf-satcom.com/blog/patch_antenna
Thank you for watching this Video, If you have Feedback or Recommendations, let me know.
Website: www.oe8hsr.at
Twitter: @MeltdownCore
Mounting the LNB on the Dual Patchfeed (POTY) the good, the bad, the ugly
In this Video Im going to show you 3 ways on how to mount the LNB onto the Dual Patchfeed POTY.
The STL Files for the 3D Prints used in this Video can be found here:
https://www.thingiverse.com/thing:3736069
These Files might also be helpful for you:
https://www.thingiverse.com/thing:3779729
https://www.thingiverse.com/thing:3725110
Special Thanks to DM4DS for making his nice Design publicly available. Check out his Thingiverse Projects: https://www.thingiverse.com/DM4DS/about
Thank you for watching this video.
Twitter: @MeltdownCore
Website: www.oe8hsr.at
MY QO100 Station Setup
In this Video I make a run-through of my QO100 Station im using. If you have Questions, let me know.
Thank you for watching
QO100 Experimental Setup
Building the Goodwatch
In this Video im going to assemble, flash and build the Goodwatch.
The Goodwatch is a replacement PCB for the Casio Calculatorwatches that adds some nice HAMRadio Features to it.
More Infos about the Goodwatch can be found here:
Twitter: @travisgoodspeed
Website: https://goodwatch.org
Git Repo: https://github.com/travisgoodspeed/goodwatch/
Wiki: https://github.com/travisgoodspeed/goodwatch/wiki
Thanks to Travis Goodspeed for providing the PCB and DF2ET for sending me the PCB and the Parts.
Assembling a VFD-Clock from GR-Projects
This is a Time-lapse Video of the assembly of a VFD-Clock Kit I bought.
I don’t get anything for making this Video nor am I in any way responsible for the kit.
Link to the Kit:
http://grother.de/bausatz-iv-11-dcf-rtc-melody-neue-version.html
Link to the Downloads Section of the Kit:
http://grother.de/downloads.html
Thanks for watching:
Twitter: @MeltdownCore
Web: www.oe8hsr.at
Giess-O-Mat Sensor soldering and testing
This is a short Video about soldering and testing a Soil moisture Sensor for a automatic Greenhouse Controller.